Isenberg 3/4'' Thermostatic Valve and Trim - 2 Outputs
SKU: 160.4401CP
$810.00
Price
- Product Type Shower Faucet Trim
- Length 5.51" Width 4.76" Height 11.41"
- View Complete Specs
- Finish Chrome
- 4 Finish Options
Select a finish option
Search options by finish color groupings
Questions About Isenberg 160.4401CP?
Innovations by VP has professionals available to assist you with your selection from Isenberg
Email an Expert
Serie 160 Collection
View AllProduct Details
Isenberg 160.4401CP
The 160.4401- .75'' Thermostatic valve with 2 volume controls has two inlets for hot and cold water separately and two outputs, on at the top and other at the bottom. The valve has a flow rate of 13.0 GPM at 60 PSI. Supply Stops - There are two safety stops at each water inlet to prevent water flow in case of installation and repairs. Handle Operation - The middle handle is used to control temperature of water flowing through the 2 outlets. The volume of water is control by either of the 2 control handles on each side (vertically) of the temperature control handle. Both the volume control handles, top and bottom, are independent of each other and water can flow through both the outlets simultaneously from a trickle to full volume. There is no diverter used in this valve. The markings on the trim next to the top and bottom handle are as follows: Position ON - Output active Position OFF - No water flow As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the surface of finished tile which should be between 2.77'' and 3.44''. Also, the valve must be installed vertical and not at an angle. In case, a tile is thicker or wall is deep, extensions are used for elongating both handles of the valve to ensure proper setting of the trim (length of extensions for TVH.4401 valve is 1.40'' inches). Extension kits comprises of thermostatic handle extension, which can be ordered separately in chrome, brushed nickel or other special finishes. Cut Out Dimensions - The cut out in wall should be 8.81'' X 4.44'' inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall. Trims - The trims comprise of well finished trim plate and handle knobs. The trim plate is used to cover the wall and has markings for ON/OFF and HOT/COLD for temperature control handle and volume control handles. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required during installation) for it to function properly. Any 4401 series trim can be used with this valve. The 2 controls are only for on and off with no diverter. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.
Additional information
- Solid Brass Construction
- Includes Thermostatic Valve - TVH.4401
- With Integral Service Stops
- 2 Output Ports
- Extensions Available - TVH.4401Exx
Resources
Online Tools
About This Brand
Isenberg
Innovations by VP is proud to present this Chrome Shower Faucet Trim, by Isenberg. The 160.4401CP is made from premium materials, this Shower Faucet Trim offers great function and value for your home. This fixture is part of Isenberg's Serie 160 Collection, so make sure to check out other fixtures to accessorize your room.
Isenberg Bath Corporation / Isenberg faucets offers a full and extensive range of plumbing fixtures certified for sale in the United States & Canada. It’s North American distribution center is in Irving TX. All items are shipped from that location. Isenberg plumbing fixtures and faucets generally come in a modern / contemporary style. Isenberg offers complete ranges of products for the bathroom including single hole faucets, 8” widespread faucets, and extensive range of thermostatic shower valves, hand showers, brass showerheads and more. All products within a collection / series are matching for the enthusiast who has an eye for designing a perfectly coordinated bathroom. Isenberg products are made in ISO certified and IAPMO audited foundry’s and are independently tested and certified by IAPMO and carry the UPC logo. Isenberg products and components are made in several countries including Germany, Italy, China and Hungary. Plumbing fixtures and valves are expected to last a lifetime. That is why Isenberg has instituted a deep and rigorous forging, casting and assembly process for all Isenberg products. Isenberg employs a distinct design / sourcing, manufacturing and assembly process. Products are conceptualized and designed collectively in the United States, Europe and Asia to ensure that we are able to offer quality product with a world-class standard with input from experts at various Isenberg locations. Isenberg uses best-in-class cartridges from well known cartridge manufacturers including Fluhs, Kerox and Sedal. All cartridges are off the shelf designs and can be provided on demand. Isenberg is also a Watersense Partner and committed to technology that conserves water usage. Isenberg's faucets and showerheads consistently use 20-30% less water than industry requirements.Isenberg offers a limited lifetime warranty on its products within the United States and its full warranty policy can be viewed on its website www.isenbergfaucets.com.